Thanks Praveen,
I tested the java map again today, and found it was working fine now...
But there seems to be a small issue still, when I was refreshing the folder(al11) where the splited file would be written, the first 2 files were empty(with 0 bytes as length), and after 1 second refreshing again, they became filled... so I set "Msecs to Wait before modificationc check" to 6s with the sender channel which will pick these files, it is working properly as far as now.
Hi Gurus,
Any solution for this post...
Regards,
Kumar
Hi,
BUYOFF_ACCEPT is a plugin for POD.
ACCEPT_BUYOFF is an activity for Process Workflow.
Functionally they should do the same but are used in different places of SAP ME.
Regards,
Sergiy
Hi
Our client requires multiple material types of same category for classification of materials instead of material groups.
If we mapped multiple material types of same category, e.g. ROH1/ ROH2/ROH3 etc, is it advisable? If not any disadvantages or issues that may arise because of this? Kindly advice.
Regards
T.Nilesh
Hi,
growing list will be suitable for your requirement. see this demo example from testsuite sap.m.List with Growing Feature Test with JSON Model
Regards,
Chandra
But you have, its right here
Dear Srivastava,
Please suggest any another. Still we are facing the same memory issue.
---------------------------------------------------
trc file: "dev_enqsrv", trc level: 1, release: "721"
---------------------------------------------------
sysno 01
sid POD
systemid 562 (PC with Windows NT)
relno 7210
patchlevel 0
patchno 214
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
pid 3804
[Thr 1824] Thu Jul 10 13:58:28 2014
[Thr 1824] profile \\SAP-GT-PO-DEV\sapmnt\POD\SYS\profile\POD_SCS01_SAP-GT-PO-DEV
[Thr 1824] hostname SAP-GT-PO-DEV
[Thr 1824] Listen successful on port/service sapdp01
[Thr 1824] EnqInitCleanupServer: Shm of enqueue table (rc = 3) does not exist, nothing to clean up
[Thr 1824] initialize_global: Enqueue server started WITHOUT replication functionality
[Thr 1824] Enqueue: EnqMemStartupAction Utc=1404971908
[Thr 1824] *** ERROR => [AttachOsShm] OpenFileMapping(FILE_MAP_ALL_ACCESS,FALSE,Global\SAP_SYSTEM_SHM_1_37) failed with Err=5
EIO*: Input/output error OR: Access is denied. [shmnt.c 2263]
[Thr 1824] *** ERROR => ShmCreate: Attach (37,67136,2) failed [shmnt.c 440]
[Thr 1824] *** ERROR => CrtOsSemAdm: Semaphore Admin. Table not created [semnt.c 2063]
[Thr 1824] *** ERROR => SemInMgt: Create Global Admin.Table failed [semnt.c 520]
[Thr 1824] *** ERROR => SemInit: Semaphore Admin. Table not initialized (Key=26) [semnt.c 847]
[Thr 1824] ***LOG GEF=> [enxxmini.h 397]
[Thr 1824] ***LOG GZZ=> Initialization of semaphore failed [enxxmini.h 398]
[Thr 1824] ***LOG GZZ=> ENSA: PID = 3804 [enservglob.c 840]
[Thr 1824] *** ERROR => initialize_global: failed to initialize the enqueue table: rc=8
[enservglob.c 843]
[Thr 1824] *** ERROR => main: Server initialisation failed!
Errortext:"error at server initialisation detected at enservglob.cpp:844 Errorinfo: "initialize_global: failed to initialize the enqueue table: rc=8
"" [enservmain.c 258]
Regards,
Somesh.K
Hi Daniel,
Yes, this is possible in standard using batch management.
Lets divide it in 2 Tasks;
1: Updating Batch characteristics after UD
2: Setting up Batch Determination config.
1: I guess you must be aware about 1st task where you need to create Batch Characteristc using CT04, Create Batch Class using CL01, then assign Batch characteristic to Batch class and assign this Batch class to Material classification view, create MIC with above class characteristic using QS21, Use this MIC in QP01.
If required, Refer QM_Class Characteristic
2: I assume, you are going to determine batches while creating Outbound delivery. Once you update batch Characteristics after UD, Batch is ready to get determined using certain search criteria.
a. Create Sort Rule using CU70. Maintain a characteristics based on which you want selection of batches to be sorted.
b. Create Search Class using CL01, Assign Batch characteristics to this class too. This is very important step, Search criteria will be set on the characteristics you maintain in this search Class.
c. Create Batch search strategy using VCH1, Here you have to maintain Search class created in above step in " Selection Criteria" and Sort rule created in 1st step in "Sort".
d. AllocateSD Search Procedure/Activate Check.
d. Activate Batch determination in SD:
These are the steps to implement Batch determination.
Also go through below documents for more detailed info
Amol.
Then you put "if "condition at SAVE and ORDER .
Thanks
Ankit
| =IF | formatdate(todate([0CALQUARTER];"yyyyMM");"MM") inlist (01;02;03) |
then ("JFM'" + formatdate(todate([0CALQUARTER];"yyyyMM");"yy"))
Hi thomas,
I am trying to run xsjs similar to your tutorial but it's giving 404 issue. In addition "Developer mode is set to true". can you please help !!!! 
Hi Christoph,
Thank You for your Inputs. It really helped.
Regards,
Gaurish
HI Vivek,
Check the DB table and the outbound queue for the modified record.If the record was not there then the modification had not yet completed.Hence no delta.
regards,
Rambabu
I tried to activate the Metadata cache.....but without success.....still same error 
Hi,
Issue resolved by Ref SAP Note #1741165 .
PS : By default, we have made forward with return = X in standard component.
Thanks
KH
Hi,
Maintain the new personal no range and assign to NUMKR feature.
or change the to number range...
Regards,
Sankarsan
Please follow the code which I have suggested in my previous post.
Hi Ibai,
I think the answer to your first question is here: FAQ: B1-SDK (SAP Business One Add-on Solution Certification).
Anyway I'm disappointed I can't create functions or stored procedure that don't affect B1 tables or UDO tables.
Regars
Hello,
Another question arises, is it possible to create cascading filters in report?
Have a look at screenshot:
What I need, is one of the following:
Either: second filter appears (or becomes active) after the first filter is applied, third appears after second is applied.
Or: values in second filter are shown considering first filter chosen value, etc.
Thus I will have not the full LOV for Department, but only those Departments, who are situated in Moscow.
It is of great importance to apply such filters in the report itself, not in query.
Many thanks in advance.
Dear SD Gurus,
I have Successfully Configured SIS in SAP, but as We know that if we Configure SIS Today it Will Start to Fetch Data into SIS from now onward.i have created few Sales orders, Deliveries, and Invoices and data Correct data is Appearing in the reports Like MCTA, MCTC, MCTE
but the problem is that it is not Showing Data from The Past.i have also Gone The Several Thread on SCN Like
SIS Historical Data Can Anyone Help Me with this Problem.
Hoping To Hear From you Very Soon.
Regards,
Zain
